The numerical simulation of extrusion process of the wheel rim was studied.
采用MARC/superform軟件對輪輞擠壓成形進行了數值模擬,得到了變形過程的金屬流動規律。
The design and manufacturing processes of ultrasonic TR probes for manual and automatic inspection of the wheel rims were introduced.
介紹了用于車輪輪輞超聲波檢測用的手動和自動探傷ＴＲ探頭的設計和制造工藝，制造出了靈敏度高、盲區小、信噪比高的ＴＲ探頭，在現場輪輞探傷中取得了良好的結果。
With the demand of car lightweight,more and more high strength steel is being used in wheel rim,and rolling has been the main processing method of steel wheel rim.
隨著汽車輕量化的要求,熱軋高強鋼不斷地被應用到輪輞上,輥壓工藝成為鋼制輪輞的主要成形方法。
The Research and Dynamic Characteristic Analyses of the Reconfigurable Machine Tool for Rim Proceeding;
可重構輪輞加工機床的研制及動態特性分析
Test Analysis of Influence of Different Rims on Tire Static Stiffness Characteristics;
不同寬度輪輞對輪胎靜剛度特性影響的試驗分析
3-D finite element analysis of a bias tire for an aeration case considering bead-rim contact;
考慮胎圈-輪輞接觸關系的斜交輪胎充氣工況有限元分析
Especially it could greatly reduce labor intensity and attrition and largely enhance the rim centering precision when replacing rim by using automatic rebanding rim device.
介紹了一種全鋼載重子午胎動平衡測量機,著重介紹了這種動平衡機的性能、結構特點、適用范圍,特別是自動換輪輞機構的使用,使本設備輪輞更換的勞動強度和磨損大大降低,輪輞定心精度大幅提高。
Rim contour inspection
GB/T9769-1988輪輞輪廓檢測
He fitted the tire around the rim of the wheel.
他把輪胎安到輪輞上。
Series of motorcycle rims
GB/T13202-1997摩托車輪輞系列
"and I saw that they had edges, and their edges, even of the four, were full of eyes round about."
至于輪輞，高而可畏。四個輪輞周圍滿有眼睛。
Solid tyres for pneumatic tyres rims
GB/T10824-1996充氣輪胎輪輞實心輪胎
Series of solid tyres for pneumatic tyres rims
GB/T10823-1996充氣輪胎輪輞實心輪胎系列
A tire tool or flat stock can be used to pry one part of the bead up over the rim flange( start near the valve stem).
可用輪胎工具或扁平的撬棒把輪緣的一端從輪輞輞圈上撬起。
6.50F-10 Wheel Rim Forming Process and Die Design
6.50F-10車輪輪輞成型工藝及模具設計
Rim contours for motor vehicles
GB/T3487-1996汽車輪輞規格系列
Rim contours for industrial trucks
GB/T12939-1991工業車輛輪輞規格系列
" Rims for tractors, agricultural and forestry machines"
GB/T3373-1982拖拉機和農業、林業機械用輪輞
Series of off-road rims
GB/T2883-1993工程機械輪輞規格系列
Study on Rim Indenting Puncher Based on Reconfiguration;
基于可重構的輪輞壓窩沖孔機的研究
A tire tool or flat stock can be used to pry one part of the bead up over the rim flange (start near the valve stem). Care must be exercised to avoid damaging the tire bead or inner tube.
可用輪胎工具或扁平的撬棒把輪緣的一端從輪輞輞圈上撬起。要當心不要損壞輪胎輪緣或內胎。
Research on the NC System of a Two-Wheel Upright Spinning Machine;
立式兩旋輪車輪輞旋壓機數控系統研究
The rim or a section of the rim of a wheel supported by spokes.
輪輞由輻條支撐著的輪子的輪緣或輪緣的一部分
" Rims series for tractors, agricultural and forestry machines"
GB/T3372-1989拖拉機和農業、林業機械用輪輞系列
This four parts assembled rim with inclined profile is used commonly for international ind ustrial vehicles.
四件式斜底輪輞是國際工業車輛最常用的類型。