"The Block and head can not be machined flat and smooth enough to provide an adequate seal. Thus, gaskets are used."
機器加工并不能使氣缸體和氣缸蓋平整光滑到嚴絲密縫,這樣就要使用氣缸墊。
The joint between the block and the head must be gas-tight so that none of the burning mixture can escape.
氣缸體和氣缸蓋之間的連接必須密封以便沒有燃燒的混合氣體泄漏。
The cooling liquid is water. Antifreeze compounds are added to the water during the winter. The water jacket are cast into the cylinder Blocks and heads.
冷卻液是水。冬季在水中須加人防凍劑。水套被鑄人氣缸體和氣缸蓋內部。
Like the cylinder block, the head is made from either cast iron or aluminum alloy.
像氣缸體一樣，氣缸蓋是由鑄鐵或者鋁合金制成。
The cylinder head is attached to the block with high-tensile steel studs.
氣缸蓋與氣缸體用高強度的鋼螺栓縛連結。
"In the other kind of valve mechanism for an engine, the valves are located in the cylinder Block instead of the head."
另一種氣門機構的氣門是裝在氣缸體上,而不是裝在氣缸蓋上。
Install cylinder head, intake manifold, and exhaust manifold, refer to cylinder head installation in this section.
安裝汽缸蓋，進氣歧管和排氣管，請參閱本部分的汽缸蓋安裝。
Position the cylinder heads onto head gaskets and cylinder block.
將汽缸蓋安置到汽缸蓋罩墊和汽缸體上。
The joint between the cylinder Block and the head must be tight and able to withstand the pressure and heat developed in the combustion chambers.
氣缸體與氣缸蓋之間的接合處必須保持密封,并且能夠承受燃燒室產生的高壓和高溫。
having both inlet and exhaust valves located in the cylinder head.
在氣缸蓋上有出口和入口。
The cylinder head fastens to the top of the block, just as a roof fits over a house.
氣缸蓋固定在氣缸體的頂上，正像屋頂套在一所房子上面一樣。
fits into the cylinder head of an internal-combustion engine and ignites the gas by means of an electric spark.
插入內燃機氣缸蓋通過電火花點燃?xì)怏w。
Process Technology Research on Valve Seat Ring and Valve Stem Guide Hole of Cylinder Head;
氣缸蓋氣門座圈和導管孔的加工工藝研究
cylinder scavenging and supercharging system
氣缸掃氣和增壓系統
Quality Optimization of Cylinder Bore Surfaces for TJ376Q Gasoline Engines;
TJ376Q汽油機氣缸體缸孔加工質量優化
The Numerical Simulation of Flow and Temperature Field in Cylinder Head of Diesel Engine with Small Cylinder Bore;
小缸徑柴油機氣缸蓋流場、溫度場的數值模擬
The most common cylinder head types are the hemi, wedge, and semi-hemi.
最常見的氣缸蓋類型是半球形，楔形和準半球形。
The Air Cylinder Covers the Mould Fin Electrode Design and Processing in CAD/CAM
CAD/CAM中氣缸蓋模具散熱片電極的設計和加工