It focuses on technical essentials of ceiling decoration with UV metal ink and its processing procedures.
介紹了UV油墨的種類、特性和用途,闡述了UV技術與UV藝術的相互關系,重點討論了采用UV金屬油墨裝飾天花板的技術要點與工藝流程。
Density and brightness values of metal inks at 95% and 100% dot when using different roller parameters in different screen lines on narrow-web flexographic press were studied.
研究窄幅卷筒柔印機采用不同參數的網紋輥在不同加網線數印刷時,在95%及100%網點處,金屬油墨的密度值和亮度值情況。
Metallic inks: Inks containing metallic powders such as copper or aluminium to give a gold or silver printed effect respectively.
金屬油墨:含有金屬粉末如銅或鋁的油墨，它分別有金色和銀色的印刷效果。
UV metal-like etching printing ink
UV仿金屬蝕刻油墨
Electrochemical Behavior of Electrodes in Media Containing Oil;
金屬及石墨電極在含油介質中的電化學行為研究
THE EFFECT OF ORGANIC VEHICLES IMPROVEMENT IN THICK CONDUCTIVEFILM INK ON SCREEN PRINTING PRECISION;
厚膜金屬性油墨有機載體改性對絲網印刷精度的影響
Quantification of lead in Zedoary Turmeric oil Injection by graphite furnace atomic absorption spectrophotometry
石墨爐原子吸收分光光度法測定莪術油注射液中重金屬鉛的含量
Paint, lacquer, etc.
油漆、金屬油漆與其它 。
Realization of Cladding Join of Metal and Graphite by Constructing a Rectangular Wave Interface
采用梯度結構進行石墨/金屬熔覆連接
Contact suppliers for samples of ink and HS foil.
聯系供應商取得油墨和燙金紙樣品。
Studies on TLP Bonding of Tungsten and Copper Alloy and Surface Metallization of Graphite;
鎢與銅合金的TLP連接及石墨表面金屬化研究
lubricating oil metal test
潤滑油金屬含量試驗
bimetallic oil pressure indicator
雙金屬式機油壓力表
Oil preserves metal from rust.
油保護金屬免于生銹。
refine sugar [oil, metals]
精制[精煉,提煉]糖[油,金屬]
putty knife of base meta
油灰刮刀,賤金屬制
quick-setting ink
快干油墨, 快固著油墨
Press the tab to release the ink cartridge. When the ink cartridge is properly released, the far end will pop up slightly.
按住突出的金屬條，釋放墨盒。如果墨盒釋放恰當，另一頭會輕微彈起。
Study on Electrodeposition Process and Properties of Self-lubricating Cu-graphite and Ni-graphite Metal Matrix Composites;
銅—石墨及鎳—石墨金屬基自潤滑復合材料的電沉積工藝和性能研究
injection-or compression-type mould (excl. of graphite or other carbon), for metals or metal carbides
金屬或金屬碳化物注入型或壓縮式模（石墨及其他碳除外）