Inclusions and total oxygen content in ultra-low carbon(ULC) steel were studied for the control of cluster inclusions in ULC steel.
為控制超低碳鋼中的簇狀夾雜物,對超低碳鋼中的夾雜物和與全氧含量的關系進行了研究。
The polarization curve of the ULC steel with titanium and niobium was measured to determine the suitable electrolytic parameters for preparation of TEM carbon replica samples.
測定了一種復合添加鈦、鈮超低碳鋼的極化曲線,選用合適的電流密度和電解時間以碳復型方法萃取鋼中的析出相制備透射電鏡觀察用樣品。
Effects of antioxidant additive on carbon pickup of ULC steel from Al_2O_3-C refractory;
以電熔白剛玉和石墨為原料,引入不同的抗氧化劑制備Al2O3-C坩鍋,在中頻感應爐中研究了含碳耐火材料對超低碳鋼鋼水的增碳作用。
It was found that by adding PPENK and polyether the critical stress-intensity factor(KIC)and impact strength were both highly increased at room temperature and cryogenic temperature.
實驗結果表明,加入一定量的PPENK及環氧聚醚后可大幅提高環氧樹脂的超低溫韌性。
Development on ultra-low-carbon steel mold powder of Baosteel;
寶鋼超低碳鋼保護渣的開發
Effect of Mould Shielded Fluxes on Concasting Billet Surface Carbonization of Ultra-Low-Carbon Steel;
結晶器保護渣對超低碳鋼連鑄坯表面滲碳的影響
Composite Treatment of Concasting Mold Flux for Ultra-Low-Carbon Steel;
超低碳鋼連鑄結晶器用保護渣的超細復合處理
Development characteristics of super-low permeability oil layers in Ordos Basin,China;
鄂爾多斯盆地超低滲透油層開發特征
Effect of Control Rolling and Aging on Structure and Properties of 570 MPa Ultra Low Carbon Bainitic Steel;
控軋和時效對570 MPa超低碳貝氏體鋼組織和性能的影響
Microstructure, properties and boron distribution of HAZ in an ultra low carbon bainitic Cu containing steel were investigated by welding simulation on a Gleeble 1500 thermal simulator.
用Gleeble1500熱模擬機對含銅超低碳貝氏體鋼進行不同焊接工藝下熱模擬試驗。
Structure Evolution of a Nb-Microalloyed Extra-Low Carbon Steel during Simulated Thermomechanical Control Process;
模擬控軋控冷過程含Nb超低碳鋼的組織演變
A Study on Reducing Dephosphorization of Extra-Low Carbon Austenite Stainless Steel 00Cr18Ni10;
超低碳奧氏體不銹鋼00Cr18Ni10還原脫磷研究