The model of collaborative design task unit as basic organizational unit in engineering design process was presented which was used to meet the requirements of collaboration,integration and distribution of engineering product design.
針對工程產品設計的協同性、集成性和網絡化要求,提出了以設計任務單元作為工程設計流程中的基本組織單元的設計方法,詳細闡釋了設計任務單元的信息模型及運行機制,給出了以設計任務單元為核心,以設計結構矩陣為組織形式,以功能、行為和結構表示的產品模型為支撐的協同設計環境體系架構,并以衛星總體設計為驗證實例建立原型系統。
Four representative aspects including modern product theory,product design process,product design solution,function of product process.
對目前該領域的相關研究現狀進行了綜述,從現代設計理論、產品設計過程、產品設計求解以及產品設計過程中的功能等四個具有代表性的方面加以總結和分析,并就今后現代產品設計理論的發展方向和研究趨勢進行了分析。
This paper developed and studied the Product Design Process Management System for Jiangsu Douleng Numeral Control Machine Joint-Stock Limited Corporation.
本文對江蘇多棱數控機床股份有限公司的產品設計過程管理系統進行了開發和研究。
Workflow management for product design process is the core management process which influences the project development cycle and total benefit.
產品設計過程的工作流管理是產品設計的核心管理過程,直接影響著項目的開發周期和整體效益。
Design process reengineering aided by axiomatic design
公理設計輔助產品設計過程重組研究
Research on Mechanical Product Design Process Based on Function Flow;
基于功能流的機械產品設計過程研究
The AVIDM-Based Product Design Process Integration;
基于AVIDM框架的產品設計過程集成
Study on Modeling, Simulation and Optimization of the Product Designing Process;
產品設計過程的建模、仿真及優化研究
Quality Control of Product Design Process in Virtual Enterprises;
虛擬企業產品設計過程質量控制研究
An effective approach of knowledge acquirement supporting design process is to establish the relation between design process and product knowledge.
建立設計過程與產品知識間的關聯,是實現產品設計過程中知識獲取的有效途徑.
Research on Methodology for Mechanical Product Design Process Modeling, Evaluation and Optimization;
機械產品設計過程的建模、評價與優化方法研究
Research on Evaluation Method for Alternative in Product Design Process;
面向產品設計過程的方案評價方法研究
Research on the Reusing Problem of Web Service-oriented Design Process;
基于Web服務的產品設計過程重用方法研究
Cost Control and Application in Design Based on Functions;
基于功能的產品設計過程成本控制及應用
Design Plan of the Medium-small Enterprise Product Development;
中小企業產品開發過程中的設計計劃
Modeling and Simulation of Product Multidisciplinary Cooperative Design Process
產品多領域協同設計過程建模及仿真
The Research on the Transition between Industrial Design and Engineering Design in Product Design;
產品設計中工業設計與工程技術設計銜接過程研究
Research on Commercial Module and the Modular Design Process;
商品化模塊及產品模塊化設計過程的研究
Case Knowledge Management of Product Design Based on Design Cognition and Design Process;
基于設計認知和設計過程的產品設計實例類知識管理研究
Product Modeling Technology and Application for Supporting Bottom Up Design
支持Bottom up設計過程的產品建模技術及應用
Our Goal-Directed process for defining product requirements is described below.
我們的定義產品需求的目標導向設計過程如下。
Product process redesign of partner enterprise in agile virtual enterprise
敏捷虛擬企業環境下伙伴企業產品過程再設計