Not only must the centers decrease, but the tolerances to produce quality bonds must also decrease.
不僅中心間距減少, 而且產生優質連接的容限也必須減少.
辭典例句
Then analysis the reasons and influencing factors of such tolerances.
最后分析出現誤差的原因以及影響因素.
互聯網
Dimensions and tolerances shall apply after application of coatings.
尺寸和公差同樣適用于噴漆后.
互聯網
Casting tolerances are in with the basic configuration blank casting size.
鑄件公役帶對稱于毛坯鑄件基本尺寸設置.
互聯網
There are very fine tolerances, and very high quality standards.
這些鑄件有著很好的耐力和非常高的質量標準.
互聯網
All dimensions and tolerances apply in a free state condition.
所有的尺寸和公差都適用于單品狀態下.
互聯網
Dasting tolerances are in with the basic configuration blank casting size.
鑄件公差帶對稱于坯料鑄件基本尺寸配置.
互聯網
Tolerances and workmanship for the trays, and tray - connection to the hoppers.
托盤的工藝和公差以及托盤與料斗的連接.
互聯網
Ask yourself: how these and tolerances can and inspected?
標注公差時要自己想象一下能不能加工到這種水平?
互聯網
Assured moisture distribution within a limited range of specified tolerances.
在特定的公差限定范圍內確保濕度分布.
互聯網
When a value is outside the table, individual tolerances shall be indicated.
對于此表中未列出的值, 其尺寸應標注個別公差.
互聯網
No conflict between feature linear and geometric tolerances.
同一標注線性公差和形位公差不能矛盾.
互聯網
Machining, lapping to close tolerances is easy.
比較容易達到機加工和拋光精度.
互聯網
The measurements of the stand automatically include tolerances.
胸架的尺寸自然包括了公差.
互聯網
Establish tolerances at each critical control point.
在每個關鍵控制點設立公差.
互聯網