Minimum dimension from centerline of valve to handwheel when ordered without floorstand.
如果不訂購地軸承架,則最小長度尺寸為閥門中心至手輪的長度.
互聯網
Foremast shall be installed on the centerline of ship's stem.
前桅安裝在船首中心線上.
互聯網
A novel 3 D centerline extraction of brain blood vessel is described.
介紹了一種新穎的三維腦血管中心路徑提取方法.
互聯網
Inspecting centerline positioning for shaft system and rudder system before boring.
軸、舵系鏜孔前中心線定位檢查.
互聯網
Specify required length from centerline of valve to base of floorstand.
注明從閥門中心到地軸承架底座的所需要的長度.
互聯網
Datum reference circle. Text can be positioned above and below centerline.
基準參考圓. 可將文本放置在軸線上面或下面.
互聯網
Specify required extension length from centerline of valve to handwheel.
注明從閥門中心到手輪的所需加長件的長度.
互聯網
Centerline discharge pump casings are not acceptable.
中心線排放泵殼是不可接受的.
互聯網
In this paper, a new centerline extraction algorithm based on Hessian Matrix is proposed.
提出了一種基于Hessian矩陣的中心路徑提取算法.
互聯網
Bend the flange on the softer the centerline of the valve and insert into the body.
彎曲法蘭上比較軟的那個端口,對準閥門的中心線,然后插入到閥體內.
互聯網
Minimum dimension from centerline of valve to base of floorstand when ordered with position indicating floorstand.
如果訂購地軸承架,則最小長度尺寸為閥門中心至地軸承架底座的長度.
互聯網
CHECK FOR FAILED TORQUE CONVERTER, MAIN CENTERLINE, OR DIFF PER SERVICE MANUAL PROCEDURES.
根據維修服務手冊,檢查失效的扭力轉換器, 主中線, 或DIFF.
互聯網
In this part , a centerline extraction based on 3 D Euclidean distance transform is presented.
2提出了一種全自動的基于三維歐幾里德距離變換的中軸提取算法.
互聯網
Consult factory for centerline to top dimensions ( open and closed ) for split wedge valves.
對于拼合楔形閘板閥門的中心線至頂端 ( 啟和關閉狀態下 ) 尺寸,請咨詢工廠.
互聯網
Now let go of your back hand backback foot and place it on the centerline.
現在把下面那只手拿開,后面那只腳后退一些,放在中心線上.
互聯網