Mounting bolt holes shall not be elongated by wear.
固定栓孔不能應使用而變長.
互聯網
Position flywheel and O ring on crankshaft and align bolt holes.
安裝飛輪和O形環在曲軸上并對齊螺栓孔.
互聯網
Hairline cracks near bearing supports and bolt holes or threads are not acceptable.
但如果裂紋離軸承支承點很近,或在螺閂孔或螺紋附近,則不允許使用.
互聯網
Caution : It is prohibited to lift the gear reducer with bolt holes on output drive flange.
注意! 嚴禁用減速機輸出傳動法蘭上的螺栓孔起吊減速機.
互聯網