The fouling prevention and on line cleaning of desiliconization preheating exchanger with the fluidized inert solid particles is investigated.
用流化床傳熱技術 ,研究惰性固體顆粒清除和防止鋁土礦熟料溶出液脫硅過程中的硅渣結垢。
Effects of ultrasonic wave on the surface properties of solid particle;
超聲波對固體顆粒表面性質的影響
Investigation on boiling heat transfer enhancement and anti-scaling process by using solid particles;
固體顆粒強化液體沸騰換熱和抗垢特性的研究
Through studying the reasons that solid particle erosion is generated in supercritical turbine during manufacture and operation, take measures by optimization and spray harden in flowing part and flexible application of by-pass system, avoiding to happen solid grain corroding phenomenon effectively.
通過研究超超臨界汽輪機固體顆粒侵蝕產生的原因,在制造和運行中采取通流部分優化及噴涂硬化、靈活運用旁路系統等防治措施,可有效降低固體顆粒侵蝕現象的發生。
Incipient motion of solid grain in solid-liquid two\|phase flow is often concerned in many petroleum technologies, such as horizontal drilling, gravel-packing and sand washing.
水平井鉆井、礫石充填及沖砂等作業都涉及到固液兩相流動的固體顆粒起動問題。
bridging solid shape
暫堵劑固體顆粒形狀
volatile suspended solids
揮發性懸浮固體顆粒
soluble fluid loss particle
可溶性防濾失固體顆粒
oil-soluble wall building solid
油溶性造壁固體顆粒
non-solid space
未填入固體顆粒的空隙
surface solids removal equipment
地面固體顆粒清除設備
one-pass solid removal efficiency
一次過濾固體顆粒清除率
Drying is used to remove the liquid trapped in the solid structure of a particle.
干燥用于除去固體顆粒結構內的濕分。
Solids may often be represented by backmix flow.
固體顆粒常常可以表示為返混流。
The solid particles were filtered from the solution.
固體顆粒從溶液中過濾出來。
At high gas velocities the circulation of solids becomes appreciable.
在高氣速時，固體顆粒循環變得顯著了。
Study on Solid Flow and Heat Transfer of Granular in Moving Beds;
移動床中固體顆粒運動與傳熱的研究
Numerical computation of aerodynamic drag coefficient for high temperature particles
高溫固體顆粒氣動阻力系數數值計算
Experimental investigation on the interaction between shock wave and solid particles
激波與固體顆粒群相互作用實驗研究
Numerical simulation on solid particle erosion of solid-liquid two-phase fluid in flow controller
節流器內液-固兩相流固體顆粒沖蝕數值模擬
The rapid mixing of solids in the bed leads to nonuniform residence times of solids in the reactor.
固體顆粒在床層迅速混合，導致顆粒在反應器中停留時間不均。
In aerated flow,solids are fluidized or suspended by the gas.
在充氣流動中，固體顆粒被氣體流化或懸浮起來。
A further discussion on the motion of solid body pellets in liquid of revolve
旋轉液體中固體顆粒運動的進一步討論