The influence degree of stiffener parameters to the baffle is studied based on the orthotropic experiment method and finite element method.
將正交試驗法與有限元法相結合,定量地分析了加強筋的數量和形狀對遮光罩動力學特性的影響程度;根據模態分析的結果,考察了單個加強筋的參數對其動力學特性的影響。
As thin-walled bars,stiffeners subjected to the axial pressure in ship panels may trip around their roots.
作為薄壁桿件,船體加筋板架中的加強筋在軸向壓力的作用下可能發生繞定軸的側向屈曲。
Based on this classification,the orthotropic plate in structure can be transformed into that in material with different methods, which means the stiffeners are to be converted into the plates added on by a certain method,and in further,it simulates the .
根據這兩種分類將加筋板按不同的方法實現了結構正交異性向材料正交異性的轉化,即將板上的加強筋按照一定的方法折合到所附連的板上,進而實現材料上正交異性板的有限元軟件模擬。
Location optimization of stiffeners of transmission housing for a truck
載重汽車變速器殼體加強筋布置的優化設計
The layout optimization of stiffeners for engine flywheel housing of a truck was discussed.
論述了載貨汽車發動機飛輪殼加強筋的布置優化設計。
An energy method is developed for analyzing the flexural torsional buckling behavior of flanged stiffeners subjected to axial force.
用能量法分析了面內受壓的薄壁加強筋彎扭耦合屈曲，研究了柔性腹板加強筋和剛性腹板加強筋以及不同結構形式加強筋（對稱型和不對稱型加強筋）彎扭耦合屈曲特性，并考慮了截面變形和板后屈曲的影響。
A simple and feasible method was used in measuring the rib mark on the parts with GMT (Glass Fiber Mat Reinforced Thermoplastic).
對GMT(玻璃纖維氈增強熱塑性復合材料)模壓制件加強筋縮痕的大小進行定量表征,并對加強筋縮痕的成因進行分析。
This paper investigates process optimization for the specific rib with section s-3 during the gas-assisted injection molding firstly,which is to get relationship between process parameters and quality evaluations,based on the Taguchi experimental design.
對截面形狀為s-3的加強筋進行工藝參數優化分析,討論了氣輔成型工藝參數對成型質量的影響程度,獲得了一組較好的工藝參數組合。
For stiffening rib in space camera,shell element is usually used.
空間相機結構的加強筋,工程分析常常采用的是殼單元來模擬。
A woven polyester fabric forms the reinforcement in membrane.
該卷材是以聚酯纖維織物作為加強筋,通過特殊的擠出涂布法工藝,使雙面的聚氯乙烯塑料層和中間的聚酯加強筋結合成為一體而形成的高分子卷材。
The mechanism and the variati0n of temperature and pressurein the cell after the reinforcement bars.
本文采用在傳壓介質（如葉蠟石等）棱邊附近埋置加強筋的方法，有效地防止了樣品從傳壓介質中被擠壓沖出來，從而提高了實驗的成功率。
The paper combines the method of orthogonal test with optimization, which can get the reasonable design of the shape and the wall thickness of rotarytable and the layout, the shape, the quantity of the reinforcement in it.
移動轉臺要求質量小而固有頻率高,文中把正交試驗設計方法與優化設計方法相結合,對轉臺框架形狀、壁厚和加強筋的布局、形狀、數量進行合理設計,能很好地處理質量與固有頻率之間的矛盾。
The main defective modes of the strengthening rib are introduced.
對機車車體這樣大型而復雜的結構,合理設計加強筋的形狀、厚度以及對加強筋的位置進行合理布置,不僅能增大結構的強度和剛度,還便于制造,減少工料的浪費。
Front and rear reinforcing post will have shelf-clip adjustment holes at1/2- inch increments.
前、加強筋上每隔1/英寸有隔板調節孔。
Design of Stiffener in the Electronic Cabinet Based on the Three-Field Coupling Analysis
基于三場耦合的電子機柜加強筋設計
Base cabinets are reinforced with internal reinforcing front and rear posts and will have shelf-clip adjustment holes.
底柜前部和后部支撐有加強筋，筋上有隔板調節孔。
BEM for analysis of elastic plane problems with reinforced ribs
邊界元法分析具有加強筋的彈性平面問題
3 Front and rear reinforcing post will have shelf-clip adjustment holes at 1/2-inch increments.
前、后加強筋上每隔1/2英寸有隔板調節孔。
Research of Metal Bracket Bead Layout Method Based on Topography Optimization
基于形貌優化的鈑金支架加強筋布置方法研究
Location optimization of stiffeners of transmission housing for a truck
載重汽車變速器殼體加強筋布置的優化設計
mesh reinforced shotcrete
鋼筋網加強噴射混凝土
can body dent
罐身加強圈, 罐身壓筋
Strength and deformation properties of H-V reinforced clay
H-V加筋黏性土的強度與變形特性
Initially all structures were prestressed by high-strength bars.
起初，每個橋梁都是通過高強鋼筋施加預應力的。
Studies on the Performance of Aeolian Sand Reinforced by Geogrids with FEA;
加筋風積砂強度和變形特性的有限元分析
Analysis on Safety Coefficient of Reinforced Earth Structure with FEM Strength Reduction;
用有限元強度折減法分析加筋土結構的穩定性
Study on Flexural Behavior of High-strength Reinforced Concrete Beams Strengthened with CFRP;
碳纖維布加固高強鋼筋混凝土梁抗彎性能研究
Research on Steel Reinforced Concrete Slabs Strengthened with High-Strength Stainless Steel Wire;
高強不銹鋼絞線加固鋼筋混凝土板的研究
Consolidation of the Structure of Reinforced Concrete after Fire Damage;
鋼筋混凝土結構火災損傷后的加固補強
Study on the Characteristics of Food Processing for Flour of High Quality Wheat Variety Shaan 253
優質強筋小麥品種陜253面粉食品加工特性研究
Stability analysis on reinforced retaining wall by strength reduction method
基于強度折減法的加筋土擋墻穩定性數值分析