The interface lattice misfitting theory can not explain that TiC and CaS act as an efficient catalyzer during the non-equilibrium solidification of austenite steel.
利用界面共格對應理論無法解釋奧氏體鋼非平衡凝固過程中TiC、CaS為奧氏體枝晶有效異質核心的現象。
The performance of granular γ+(Fe,Mn)3C eutectics reinforced austenite steel matrix composites (EAMC) was studied, and the strengthening/toughness match and wear resistance were analyzed.
在研究團球γ+(Fe,Mn)3C共晶體增強奧氏體鋼基自生復合材料(EAMC)的力學與耐磨性能的基礎上,分析了EAMC的強韌化及耐磨機理。
The effect of sliding velocity on the friction behaviors of in situ granular 7+(Fe, Mn)3C eutectics reinforced austenite steel matrix composites (EAMC) has been investigated by the pin-on disc dry sliding tests and scanning electron microscopy (SEM) observation.
利用MPX-2000型主軸盤銷式磨損實驗機和掃描電子顯微鏡(SEM)研究了相對滑動速度對團球γ+(Fe,Mn)_3C共晶體增強奧氏體鋼基自生復合材料(EAMC)摩擦學性能的影響。
The direct relationship between stacking fault energy and phase transformation driving force of austenitic steels and the effect of stacking fault energy and strain energy on the morphology of martensite are deduced.
導出了在奧氏體鋼中相變驅動力與層錯能的關系以及層錯能和應變能對馬氏體形態的影響規律。
The effects of stacking fault energy and strength on phase transformation in cryogenic austenitic steels were studied.
研究了低溫奧氏體鋼中層錯能和強度對相變的作用 ,導出了相變臨界分切應力和層錯能與強度之間的關系式。
On the basis of systematical study,the comprehensive effects of alloying elements in cryogenic austenitic steels were analyzed.
在系統研究結果的基礎上,分析總結了低溫奧氏體鋼中合金元素的綜合作用。
The recent developments of cryogenic austenitic steels are reviewed.
綜述了低溫奧氏體鋼的研究進展 論述了高錳、高氮奧氏體鋼低溫脆斷模式及其斷裂機理 ,指出不同合金化的高錳、高氮奧氏體鋼有著不同的層錯能、相變臨界分切應力、解理強度、屈服強度 ,因而有不同的斷裂現象 ,包括晶間開裂、穿晶脆斷、退火孿晶界開裂 著重探討了穿晶脆斷現象 ,指出穿晶脆斷是高錳含氮奧氏體鋼特有的脆性斷裂形式 提出了今后的研究方
Effect of ESR on Cryogenic Toughness of Austenitic Steel
電渣重熔對奧氏體鋼低溫韌性的影響
ferritic-austenitic alloy steel
鐵素體奧氏體合金鋼
Krupp austenitic steel
克虜伯奧氏體不銹鋼
Boronizing of ZG1Cr18Ni9 austenite stainless steel
ZG1Cr18Ni9奧氏體不銹鋼的滲硼
THE EFFECT OF PRIOR AUSTENITIC GRAIN BOUNDARIES ON NUCLEATION OF(225)_γ MARTENSITE IN STEELS
鋼中原始奧氏體晶界對(225)_γ馬氏體形核的影響
Study of Continuous Cooling after Austenite Deformation of Low Carbon Bainitic Steels;
低碳貝氏體型鋼變形奧氏體連續冷卻研究
Effect of Minor Boron on Undercooled Austenite Transformation in Low Carbon Bainite Steel
微量硼對低碳貝氏體鋼過冷奧氏體轉變的影響
Welding of Austenite-Ferrite Diphasic Rustless Steel
奧氏體-鐵素體型雙相不銹鋼的焊接
Study on Active Screen Plasma Nitriding of Austenitic Stainless Steel;
奧氏體不銹鋼活性屏離子滲氮的研究
Study on Wear and Corrosion Properties of New Type Austenitic Stainless Steel;
新型奧氏體不銹鋼磨損、腐蝕性能研究
Strain Hardening of Cryogenic Vessels from Austenitic Stainless Steels;
應變強化奧氏體不銹鋼低溫容器研究
Study on Stress Corrosion Cracking of Austenite Stainless Steel Bellows;
奧氏體不銹鋼波紋管的應力腐蝕研究
A Study on the Welding Technology of the Aoshi 18-8 Typed Stainless Steel;
18-8型奧氏體不銹鋼焊接工藝研究
Study on Fatigue Properties of a New Type Austenitic Stainless Steel 24Mn18Cr3Ni0.62N
奧氏體不銹鋼24Mn18Cr3Ni0.62N疲勞性能的研究
Welding and Properties of Cr15Mn9Ni1N Austenitic Stainless Steel Welded Joints
Cr15Mn9Ni1N奧氏體不銹鋼的焊接及接頭性能
The Austenite Inverse Phase Transformation Quenching in Zero Time Holding of 40Cr Steel
40Cr鋼“零保溫”奧氏體逆相變淬火
Rietveld Full Pattern Fitting Method for Quantitative Phase Analysis of Austenite in Iron and Steel
Rietveld精修定量分析鋼中殘余奧氏體
EVALUATION OF MATERIAL DEGRADATION FOR AUSTENITIC HEAT-RESISTING STEEL BY USING MAGNETIC METHOD
磁性法評價奧氏體耐熱鋼的材質劣化