Numerical simulation of slit type cracking test for 9%Ni steel
9%Ni鋼斜Y形坡口裂紋試驗的數值模擬
Numerical simulation of slit type cracking test for 9%Ni steel
9%Ni鋼斜Y形坡口裂紋試驗的數值模擬
The Mechanical Behavior of Notch/crack Specimens of NiTi Shape Memory Alloy at Different Load Modes;
不同加載方式下NiTi形狀記憶合金缺口/裂紋試樣力學行為的研究
Experimental Study and Modeling of Fatigue Crack Growth Profile and Cracking Path for 16MnR Steel
16MnR鋼疲勞裂紋擴展形貌和擴展路徑的試驗研究與數值模擬
The Experimental Research on Several Points in Unified Fracture Theory of Ductile Material;
金屬材料裂紋體與無裂紋體統一斷裂理論若干問題的試驗研究
MODEL TEST STUDY OF CRACK IDENTIFICATION ON STEEL TRUSS BRIDGE
鋼桁架橋梁裂紋識別的模型試驗研究
Experimental study and numerical simulation on propagation characteristics of wing type cracks under compression
翼型裂紋擴展特性的試驗和數值分析
Mechanism of Crack Formation During Continuous Casting of Peritectic Steel Slabs
包晶鋼鑄坯裂紋形成機理的實驗研究
Standard test method for surface-crack fracture toughness Kle of metallic plates
GB/T7732-1987金屬板材表面裂紋斷裂韌度Kle試驗方法
Research on the crack growth angles of Ⅰ-Ⅱ-Ⅲ mixed mode crack with photoelastic experiment
Ⅰ-Ⅱ-Ⅲ復合型裂紋開裂角的光彈性試驗研究
Hydraulic Fracture Test and Crack Propagation Simulation by Element-Free Method;
巖體水力劈裂試驗及裂紋擴展的無單元法計算
No stress measurements or crack surface samples were available for examination, only the surface crack configuration.
沒有應力測量或裂紋表面取樣可用于檢驗，只能依據表面裂紋圖形。
Design of Specimen Crack Image Recognition System on Temperature-Stress Test Machine;
溫度—應力試驗機試件裂紋圖像識別系統設計
Cracks have been found in the flange and web splices at groove welds in at least four bridges.
至少在四座橋梁的翼緣板和腹板拼接坡口焊縫中發現了裂紋。
Often lack of fusion adjacent to the girder web in the transverse groove welds led to the cracking.
在靠近主梁腹板的橫向坡口焊縫處常常出現未熔透而導致裂紋。
Examine block for cracks or fractures.
測試泵體裂紋或破裂。
The fact is fully testified by inspection of cracks revealed in the dissecting tests of three pieces of mold-lump scrapped by ultrasonic flaw detection.
對超聲探傷報廢的三塊模塊進行解剖試驗，表露出的裂紋形貌完全說明了這點。
Experimental results indicate that, in the case of single peak stretching overload,intense overload retartation effect (OLRE)exists in short fatigue crack growth and the short fatigue crack is moro sensitive to the OLRE.
試驗表明，在單峰拉伸過載情形下，短裂紋擴展存在比較強烈的過載遲滯效應；
Stress Analysis for the Problem of a Circular Hole with Three Unequal Straight Edge-cracks
帶三條不對稱裂紋的圓形孔口問題的應力分析